• Skip to primary navigation
  • Skip to main content
  • Skip to footer
USSign

USSign

Architectural Signage

  • Company
    • About Us
    • News and Events
  • Products
    • Reverse Channel
    • Prismatic
    • Waterjet Cut
    • Plaques
    • Etched
    • Halo Lit
    • Face Lit
    • TrimPlus
    • Acrylic Edge Lit
  • Materials & Finishes
    • Stainless Steel
    • Titanium
    • Brass
    • Copper
  • Ordering
  • Get a Quote
  • Contact

Copper

Home / Materials and Finishes / Copper

Copper Specifications

Copper C/1000
NOTE: This material does require a protective clear-coat. We do not recommend using copper outdoors.

Copper Finishes

Polished

A reflective finish that requires a protective clear-coating. Not recommend for outdoor use.

Satin

A semi-reflective finish with a hairline running through it that requires a protective clear coat. Not recommend for outdoor use.

Nondirectional

All standard sanding grits available. Depending on the sanding grit specified this finish can be reflective or semi-reflective.

Verdigris Green Copper

A finish achieved through a chemical immersion process which accelerates the natural aging process.

Patina Blue Copper

A finish achieved through a chemical immersion process which accelerates the natural aging process.

Specifications

99.9% Copper
NOTE: This material does require a protective clear-coat. We do not recommend using copper outdoors.

Warranty

US Sign guarantees the construction of our products for the life of the sign.
This warranty covers the cost of repair or replacement of defective pieces, plus shipping costs. We reserve the right to decide whether to replace or repair the product in question. Our warranty does not include costs for de-installation, re-Installation or other associated expenses.
Although our brass and copper products receive a protective clear-coat, we do not guarantee the finish on brass or copper when used in an outdoor environment. For oxidized brass and copper, we cannot guarantee consistency of color over a large surface or from letter to letter.
Thank you for your interest in our products. Please contact our customer service department if you have any questions.

Note: To clean brass or copper, use clean water; always use a soft cloth. Cleaning with abrasives or chemical materials will damage the clear-coat and allow oxidation to occur.

Call Us Let's Work Together

Let’s work together

Get in touch with us and send some basic info about your project.

 

Request A Quote

Footer

Contact

USSign and Fabrication Corp.

One Trefoil Drive
Trumbull, CT 06611
203.601.1000 main
203.601.1020 fax

Directions

Get directions
Contact

Search

© 2023 · US Sign and Fabrication Corp · Privacy